More techniques and equipment for services

Medcom Advance, S.A. is also provided with other equipment for their use in different applications. Find below some of them.

If you require some more conventional equipment or facility, do not hesitate to contact us!

UV-Vis spectroscopy
Thermo Scientific

UV-visible Evolution 201

Technical details:

  • Double-beam geometry with 1 nm spectral bandwidth for precision measurements
  • Xenon flash lamp
  • Electronic triggering provides the highest level of accuracy for rapid-mixing kinetics measurements
  • Precision monochromator
  • INSIGHT Software

Optical and fluorescence microscopy


Technical details:

  • Observation methods: Bright Field, Apodized Phase Contrast*1, Phase Contrast, Emboss Contrast*2, Epi-Fluorescence
  • Optical system: CFI60 Infinity Optical System
  • Illumination: LED illuminator
  • Eyepiece (F.O.V.): 10x (22), 15x (16), 20x (12.5)

Automatic colony counter
IUL instruments


Technical details:

  • Colony counting
  • Standard methods
  • Automatic calibration and verification
  • Report generation

Hybrid Multi-Mode Reader

Synergy H1

Technical details:

  • UV-Vis absorbance, Fluorescence intensity, Luminescence measurements
  • 230 – 999 nm range
  • Monochromator bandwidth
  • 6- to 384-well plates
  • Take3 Micro-Volume Plates

Spin coater
Laurell Technologies

Laurell WS-650 spin coater


Technical details:

  • Substrates: up to ø 150 mm wafers and 5″ × 5″ (127mm × 127mm) substrates, and features
  • Speed: maximum rotational speed of 12,000 RPM (based on a ø100 mm silicon wafer)


Accurate dispensing of a liquid, typically photoresist, onto a substrate, typically a semiconductor wafer, then spinning to achieve a uniform, defect-free film.


Oxygen plasma system
Plasma Technology

PlasmaFlecto 10


Technical details:

  • Usable chamber dimensions WxHxD: 175 x 160 x 320 mm
  • Touch control system
  • Adjustable parameters: time, pressure, power, process gas
  • DeVilbiss® Compact Oxygen Concentrator 


  • Cleaning of surfaces and micro-components
  • Activation of surfaces before bonding, etc.
  • Surface etching and partial removal of various materials

UV lamp


Technical details:

  • Lifetime exceeding 20,000 hours
  • Consistent light intensity
  • Irradiation area on the x- and y-axis
  • Very even distribution of light


  • Glass bonding
  • Display bonding (sizable, low-tension curing)
  • Thicker, flat adhesive layers
  • Small component bonding with short cycle times
  • Microswitch bonding
  • Bonding of mini-loudspeakers



3D Printer

Bambu Lab

3D Bambu Lab P1S

Technical details:

  • Enclosed-body for high-temperature filament printing
  • PLA basic black filament
  • Up to 20000 mm/s² acceleration, prints a benchy in 18min
  • Built-in camera for remote monitoring and timelapse